Introducing Die-namics!

MFT is proud to introduce Die-namics, its own exclusive, American-made line of steel dies!

Here are the three Die-namics dies being released MAY 5!

MFT Die-namics Clouds (element die) (one die, with three different sized clouds on it)
Small – 1.25” wide and .70” tall
Medium – 1.89” wide and 1.06” tall
Large – 2.51” wide and 1.41” tall

MFT Die-namics Jumbo Scallops (Edge die) 6” long, with each scallop measuring 1.5”

MFT Die-namics Scalloped Scallops (Edge die) 6” long, with each scallop measuring 1.5”

This was the "surprise" in the VIP packages last week -- now everyone can have them! :)

They are so easy to use, and they cut beautifully! I have tried them with both the Cuttlebug and Big Shot. Here's how to use them with the Big Shot:

1. Place the die (here I'm using the Jumbo Scallop die on sandpaper) face-down against the edge you want to cut.

2. Now flip it over and place into the "sandwich" in this order (bottom to top):
All Purpose Platform (completely closed)
Cutting Mat
Die (cutting surface face-up)
Material to be cut (face-down against the die)
Cutting Mat

3. Run it through your machine, and voila!

If you're using a Cuttlebug, here's the "sandwich" order (bottom to top):
A Plate
C Plate
Die (face-up)
Material to be cut (face-down)
B Plate
Extra piece of cardboard

You can cut so many materials with these dies! Here are just a few (click on photos for a closer view):

Acetate

Cardboard


Cardstock

Photo Magnet Sheets (I have big plans for this one!)

And of course, patterned paper (shown here with the Scalloped Scallops die)

So, do you want to see what I made with these fabulous dies? I created a frame for one of my very favorite photos. These are my oldest two children when they were younger, many years ago, on our first family trip to the beach!

I created three rows of Jumbo Scallops out of sandpaper and patterned paper, then I inked the edges. The sentiment is from Clearly Sentimental about Babies.

I used white craft ink on the edges of the acetate clouds, then I adhered them with a couple dots of glue from my Quickie Glue Pen.

I just love how this project turned out, and I can't wait to use these dies again! If you're looking for more fun with the new Die-namics, head over to Kim's Blog after 11 am. She will have a list of designers who have samples for you!

Tomorrow is the first day of May, and it's also the first day of MFTeasers! There's so much going on, and I hope you'll stop back to see it all! Thank you SO much for visiting today! :)

Have a Fantastic Friday!

Christina

Pin It